 |
 |
 |
The Hydra Pro XP3 improves on the original
Hydra
XP flashlight by delivering over
4X the brightness with longer extended run times! The Hydra Pro XP3 is constructed from a retail Maglite (TM) 2 D cell flashlight modified with three P4 LEDs and tri-power DC/DC converter. The Hydra Pro XP3 pushes the envelope of portable lighting by delivering extreme illumination in a modified common size and weight 2 D cell flashlight. |
 |
. Operates on 2 standard D size NiMh rechargeable batteries . 3 hour run time on two 11000 mAh Titanium NiMh D cells . Tri-power DC/DC converter for constant light output over the life of the batteries . Select grade P4 LEDs deliver pure white light . LEDs are rated for 50,000 hours of operation - never change a bulb again . Solid state Luxeon LEDs won't burn out from drops or bumps like incandescent bulbs . Three reflectors provide a broad but focused beam of light . UCL™ front window transmits 7% more light than the stock front window . Improved heatsink for better thermal management and cooler operation . Optional Hot Rod adapter for 50% increase in light output using 3 NiMh C cells |
 |
The Hydra Pro XP3 brings new utility to portable and emergency lighting by providing extreme illumination levels not typically seen in common sized 2 D cell flashlights. Improved brightness, extended run times and whiter tint combine to make the new Hydra Pro XP3 flashlight a true improvement over the original Hydra flashlight. |
 |
 |
 |
A popular 2 D cell incandescent flashlight illuminates a picnic table at night. Distance to the target is about 70 feet down a hill. |
 |
A Hydra flashlight illuminates the target and the surrounding area. The Hydra Pro XP3 covers the picnic table and surrounding ground in bright light, even illuminating branches in the foreground not visible with other flashlights. |
 |
Hydra Pro XP3 use a tri power DC/DC regulator to maintain constant light output over the life of the batteries. Three select grade P4 power LEDs produce pure white light. |
 |
 |
 |
Hydra Pro XP3 Special Edition P4 LEDs -
$200.00
includes Shipping (US);
International shipping $22.00 400 Lumens (2D NiMh cells) 600+ Lumens (3C NiMh cells) NOTE: You must use NiMh cells with the Hydra flashlights; alkaline cells can not deliver the energy required |
|
Hydra Pro XP3 Special Edition 3D P4
LEDs
- $220.00
includes Shipping (US);
International shipping $30.00
Sorry, Sold Out The Hydra Pro XP3 SE 3D cell flashlight - Blue Case This is the mother of all LED flashlights 600 to 700+ Lumens ! NOTE: You must use NiMh cells with the Hydra flashlights; alkaline cells can not deliver the energy required |
 |
OPTIONAL HOT ROD ADAPTER -
Get 50% more light output with the Hot Rod adapter. Fits inside the standard Hydra Pro XP3 battery tube and adapts it to use 3 C NiMh cells for increased light output, but with reduced run time of about 60 minutes. |
| PayPal - Send
PayPal to lambda@mchsi.com . In the
remarks block enter the item and options you wish to purchase. If your
contact email address is different than the email address used for your
PayPal payment, be sure to include it in the remarks section of your order
so that we can contact you if necessary. Check/Money Order - Send an email to lambda@mchsi.com and list the products you wish to purchase. You will receive an order confirmation email with mailing instructions. Print a copy of the email and include it when mailing payment. Items shown as in stock will normally ship within 24 - 48 hours of receipt of payment. Note that personal checks may require 3 to 7 days to clear the banking systems before shipment. Preferred payment method is US Postal Service money order. |
| Shipping - Hydra Pro XP3 orders are shipped by Priority Mail United States Postal Service (USPS) with insurance. International Orders ship by Global Priority (USPS) Mail. |
| * All flashlights are modified
retail flashlights. Original manufacturer is not associated with after
market modifications.
Direct all correspondence to lambda@mchsi.com. |