MJLED 5mm Power LED	NEW ! Super Bright 5MM Power LED 100mA Input Max

MJLED - Plugin LED Mod 

Introducing the MJLED - The most efficient LED available today. 

ArcMania has modified these new hi-power, super efficient large die 5mm LEDs to function as side emitters for use in flashlights with reflectors. These are a direct plug in replacement for the bi-pin incandescent lamps used in popular two cell flashlights. Simply remove the stock incandescent bulb, replace it with an MJLED and either drill out the reflector opening to 0.25 inch, or swap the reflector with a pre-drilled one from the complete MJLED Kit. That's all there is to perform this modification to a flashlight.

Sound too good to be true? Well it's not, and we haven't told you about the best part yet; the performance. 

How does a 35 hour+ run time sound?  



Note the initial illumination level of 180 Lux at one meter is about what the first Arc Luxeon flashlights produced. But unlike the power hungry Luxeon LEDs, the MJLED needs much less power to produce the same level of light which results in a very long battery life. Heck, it's still turning out about 120 Lux after 24 hours continuous use.

In addition to the very long battery life, the color tint of these LEDs is much better and consistent than Luxeon LEDs. No more "Luxeon Lotto" hoping you don't get a dirty green tint. All the MJLEDs produce a very white light with a slight blue tint, closely resembling a Luxeon BIN Y0 color temperature. And the special ground and polished lens produces a smooth, bright beam with consistent tint. 

While this isn't a super bright mod that will get "oohs and ahs" from your friends, this is one flashlight mod nobody should be without. The 180 Lux light level produced is perfect for walking trails while preserving most of your natural night vision. The reflected illumination from the trail won't rob you of your natural night vision, yet it's bright enough to light a pathway to easily see obstacles on and off the trail. There's also plenty of light for tasks such as looking behind the stereo to locate a jack to plug a cable into and other similar common tasks.

This mod does require the use of Energizer AA or AAA lithium cells for best performance,  but alkaline cells can also be used with lesser performance. 

Examples of MJLED modifications:

Here's a MiniMag 2AA flashlight that's been modified with an MJLED.

The MJLED plugs in place of the stock light bulb.

Here's a respectable 'light saber' beam shot against the wall.

And at tightest focus from about six feet (2 meters).

Note: Regular incandescent room lighting was on when these photos were taken

Here's a MiniMag 2AAA flashlight that's been modified with an MJLED. 

Yes, it's finally possible to mod the 2AAA MiniMag!

In a snap you transform it in to a bright LED flashlight with a very long run time.

While we didn't have any lithium AAA cells on hand to test with, the recently released AAA lithium cells should provide a big boost in performance over the alkaline cells used for these photos. (Lithium AAA run time test coming soon)

Features Summary:

35 Hour+ run time on 2 Energizer lithium AA cells
180 Lux typical at one meter 
Easy, "anybody can do it" simple installation

When supplied with lithium AA cells, this makes one of the longest burning emergency lights with a 10 year shelf storage life. Never be left in the dark again.

"If I were going cave exploring, this would at the very least be hanging from my belt as a back up light, if not being used as the primary illumination" 

MJLED Specifications:

100mA maximum input current
3.0 to 3.6 V optimal operating range
Precision ground and polished custom optic
Reverse polarity protected

>Click here for installation, alignment and use information<

Ordering Information:

MJLED - SORRY SOLD OUT $5.00  plus $1.00 shipping (US & Canada) International Shipping $5.00
* MJLED only; you must drill the reflector opening out to 0.25 inch for use with the MJLED

MJLED KIT - SORRY SOLD OUT $10.00 FREE SHIPPING on Kits! (US & Canada) International Shipping $5.00
* Everything you need to perform the modification in a snap. Includes an MJLED, pre-drilled reflector and mineral glass front window. Just swap the parts out with the stock ones and you're done in a few minutes. For use with MiniMag 2AA flashlights.

Send PayPal to lambda@mchsi.com 

Email  lambda@mchsi.com for other payment methods 

* All flashlights are modified retail flashlights. Original manufacturer is not associated with after market modifications. Direct all correspondence to lambda@mchsi.com.