Nano-Mate
 |
Hosted in a modified Streamlight Key-Mate
flashlight, it is small enough to fit comfortably into almost any
pocket, or on a key ring, or even hang around your neck on a lanyard (included). Small size, light weight, bright and
reliable operation will make this an indispensable illumination tool for
hiking, camping, and other outdoor activities where equipment must be
carried. Pilots, policemen and others will find its small size, bright
output, and long run time attractive as a source of illumination for
cockpits, paper work, and other such activities that must performed after
dark.
Nano-Mate flashlight on left shown next to
Brinkmann 1AAA flashlight on right
|
 |
The Nano-Mate uses the new EOS
process Luxeon LED for bright, smooth light output that maintains it's
color tint from the center of the beam to the edge of the corona. Unlike
other tiny LED lights, you won't find yourself distracted by color variations
in the output beam. The broad beam of light produced by the Nano-Mate allows you to actually see what's around you without having to
constantly point a small spot of light at items of interest like other
flashlights force you to do. |
 |
Don't be fooled by it's small size. Unlike most LED flashlights, the Nano-Mate has real
throw to it's powerful beam. A supper efficient DC/DC converter circuit
and select grade Luxeon LED combine to produce amazing light from this
tiny flashlight. This is one little flashlight that won't leave you in the
dark. |
Nano-Mate $60.00
Shipping Included worldwide
Titanium Silver
case
Sorry, Sold Out
Care and Feeding of the
Nano-Mate
 |
The Nano-Mate uses a very thin aluminum
sleeve (0.15mm) to adapt the N cell and provide a negative contact for the
LED Pill. The aluminum sleeve is very fragile and can be easily damaged
through mistreatment. Never apply excessive force when installing
batteries. The sleeve will stay in the battery tube under normal
conditions. This modified flashlight has been tested with Radio Shack,
Duracell, and Energizer N cell batteries. It is possible that other brands
may have larger diameters and not function properly. If the battery does
not easily slide into the flashlight, DO NOT force it into the flashlight.
You may have a very hard time getting it back out later. |
 |
Once the battery is installed into the
battery tube, the Luxeon Pill should be installed into the head assembly.
Carefully screw the head on to the battery tube.
Note: When changing batteries, be careful
that the LED Pill does not get lost. Do not attempt to change batteries
while riding horse back, or in other non-stable environments. Battery
replacement is best done on a table or counter top where all parts can be
easily kept track of, so nothing gets lost or damaged. |
 |
As you screw together the flashlight, be
very careful that the LED Pill does not catch on the lip of the battery
tube. This may happen when the o-ring is still visible. DO NOT force the
flashlight together. If resistance is felt at this point, loosen the head
assembly and try again. It is normal for the light to come on briefly
during the assembly process. Again, DO NOT apply excessive force when
assembling the flashlight as you may damage the LED Pill or battery
sleeve. |
 |
When the LED Pill is properly centered in
the battery tube, the o-ring will no longer be visible. Continue to
tighten the head until the light comes on and resistance is felt; this is
the "ON" position with the head screwed all the way down. DO NOT
apply excessive force to the head assembly. Screwing the head down with
too much force may distort the top of the battery sleeve making it
difficult to remove the battery later. To turn the flashlight
"OFF", loosen the head assembly 1/2 to 1 full turn. |
 |
The Nano-Mate will provide you with hours
of light under normal intermittent use, and will provide approximately 30
minutes of continuous run time. After continious use, the battery will
supply more light if allowed to rest for a few hours. Alkaline N cells
have a high internal resistance and provide best service in intermittent
use.
However, NiCd/NiMh rechargeable N cell batteries may
be used, and typically will provide better service under continuous use
due to their lower internal resistance than alkaline cells. |
Note: Use of excessive force when turning
the light on may distort the top edge of the battery sleeve. This may result in
the aluminum sleeve sliding out with the battery when attempting to change
batteries. Handle the aluminum battery sleeve with care. Use a tooth pick to
push the battery out of the aluminum sleeve half way. Then carefully roll the
lip of the aluminum sleeve on a hard surface using the battery to reform and
smooth the top edge of the aluminum sleeve. The battery should then slide out
without difficulty. Handle the aluminum sleeve very carefully and re-insert it
into the flashlight battery tube. Do not distort the aluminum tube or batteries
may not slide in and out easily in the future.
Terms and Conditions of Sales:
These lights are sold as prototype experimental flashlights. As such,
they have no warranty, or implied guarantee as to suitability for any purpose,
or length of serviceable life. These lights may operate the internal electronics
beyond their published design limits for both voltage, current and temperature.
As a purchaser of this light, you can help fellow CPF
members by posting your experiences (good or bad) while using the light.
Suggestions for improvements or new features are always welcome.
Order and Shipping Information
--PayPal accepted--
PayPal lambda@mchsi.com
Contact lambda@mchsi.com
for other payment or shipping methods.
* All flashlights are modified retail
flashlights. Original manufacturer is not associated with after market
modifications. Direct all correspondence to lambda@mchsi.com.
