Here is the pool table.
Angle View
The pockets are drop pockets. The gold braided pocket
decorations just need to be glued back on. There is one for each pocket
Here's another view of the pocket.
End view of the table.
Top view of a bumper and table top.
Closer view of table and pocket without the decoration
glued on.
These 6 side pieces need to be attached last. There
are two for each side and one for each end. They hide the staples that
you can see behind them and in the picture below.
Close up of the staples the staples that hold the felt down. These may be able to be pulled out so that you can reuse the felt, but that's to be determined when it is dismantled.
You can see a few scuffs on the bumpers and some scuffs on the underside of the table. When the side pieces are attached, the bottom part is pretty well hidden.
This is a cue rack that can be mounted to the wall.
If it had new clips, it would work well.
Other accessories include 10 cues (most need new tips),
a set of balls, a rack and a brush.
Heres a close up of the brass plate that is on the
Pool table.